March 4, 2020

Packaging equipment for medicines

Medicines are a particularly important type of pharmaceutical products, as they directly affect health and quality of life of the population. To create a truly effective and safe product, the manufacturer must pay attention not only to choice of raw materials and manufacturing technology, but to organization of technological processes as well.

Packaging equipment for medicines

The requirements for equipping pharmaceutical production are enshrined in special standards, the main of which is GMP. According to these regulations, equipment for the manufacture and packaging of drugs should fully ensure:

  • compliance with the fixed technology,
  • maintaining the structure and properties of the product,
  • protection of the drug against the risk of pollution and contamination,
  • convenience of management and control of work for personnel,
  • ease of cleaning, other care and maintenance.

Focusing on GMP has already ceased to be a voluntary practice, today it is an indispensable component of the activities of any pharmaceutical company. In this regard, modern manufacturers are actively carrying out modernization and re-equipment of their sites, choosing more high-tech, powerful and reliable equipment to perform various processes. Compliance with the requirements of the standard applies not only to the direct manufacture of a pharmaceutical, but also to its packaging. We propose to consider in detail how the specificity of the drug affects the selection of suitable equipment for its fill and finish.

1.jpg

Types of equipment for bottling liquid, thick and powdered medicines


Medicines have various forms, i.e., states, in which it becomes possible to achieve one or another therapeutic effect. Based on this feature, these products are classified in medicine according to consistency, dividing into doses, spectrum of action and method of application. When choosing equipment for filling the drug, the consistency will become an especially important criterion.

What types of dispensers and other packaging systems are suitable for a particular type of drug and how do they differ?


Liquid dosage forms


For dosed supply of liquid drugs (solutions, suspensions, emulsions, galenic preparations (tinctures and extracts), drops, syrups), peristaltic dosing pumps are most widely used. The units work by squeezing the hoses with a constantly rotating body (wedge pad, roller). The section with liquid is separated by a roller and, due to the occurrence of reduced pressure in another section, moves towards the outlet pipe. Liquid preparations are packed in jars, bottles and vials made of glass and plastic, ampoules, syringes and soft bags. Equipment for packaging medicinal liquids is on the market in a wide variety. There are separate models of dispensers, cappers and other machines, as well as complex units that perform the full cycle of drug packaging: filling lines (for example, “Master” filling line for infusion solutions, “Master” complex filling line for Bottle Pack) and monoblocks (monoblock filling and stoppering "Master" for penicillin vials MZ-400ED, monoblock "Master" for filling and capping pharmaceutical solutions, monoblock "Master" for filling drugs into glass vials with dropper and plastic screw cap).

2.jpg

Viscous pharmaceuticals


Thick and viscous pharmaceutical preparations, such as ointments, pastes, suppositories, gels and liniment, are packed using piston dosing units. The principle of operation of these machines is based on the movement of the piston, as a result of which vacuum appears under it, and the product is sucked from the receiving tank and fed into the container. During the reverse movement of the piston, the valve closes and the flow stops. Glass and plastic containers, as well as tubes are most often used for packing thick medicines. In addition to the classic dispensers, a large assortment of other packaging units for these pharmaceutical products is produced nowadays, including tube filling machines, linear and one-piece solutions (semi-automatic line for filling thick products "Master" MZ-400ED, monoblock "Master" with 8 piston dispensers, 5,000 vials/h for antiseptics, monoblock for filling and stoppering viscous products (gel for ultrasonography and hyaluronic acid) "Master" MZ-400ED).

3.jpg

Loose pharmaceuticals


For filling powdered preparations, characterized by flowability, screw dosers are used. The main working body of such machines is a screw (auger), which, rotating, moves the product into the packaging. When the auger stops working, the feed stops. Installations can be additionally equipped with agitators, which do not allow the product to stick together. For further packaging of powdered medicines, various models of blister machines, tablet presses and other units have been developed (MD-500T manual tablet press, BOOM-1 blister packaging machine, automatic monoblock for filling and capping bulk products MZ-400ED). In addition, there are special installations (capsulators), used for packing powders in gelatin or polymer capsules.

4.jpg

In recent years, there has been an increasing tendency among pharmaceutical manufacturers to switch to a flow mode of operation. Many enterprises, even producing products in small volumes, are keen to automate processes as much as possible in order to avoid any risks of releasing a poor-quality drug. Despite the high cost of arranging conveyor lines compared to manual and semi-automatic installations, this equipment allows you to achieve the highest accuracy of operations, significantly save time and, ultimately, pays off very quickly.

5.jpg


AURORA PACK ENGINEERING

WerExpro
Latest posts by email:
To subscribe to the newsletter, first Come in Either Register

Other news

Ways to Label Cone Containers
Pharma

Vials, bottles, cans, buckets and conical shaped cups have already become common and familiar to us in packaging of various products. In retail outlets, you can find a wide selection of products manufactured in such containers: yogurts, sauces, condensed milk, alcoholic and non-alcoholic drinks, sports nutrition, cosmetic creams and others. In highly competitive environment manufacturers develop new, even more original and more convenient for the consumer containers on the basis of the main cone format (for example, an hourglass PET bottle, which is widely used for filling mineral water and sweet carbonated drinks).

12.05.2020
Packing products in sachets
Pharma

Sachet is a type of individual packaging of portioned products that is widely in demand in the food, pharmaceutical and cosmetic industries. Demand for these compact packaging in the consumer environment is growing rapidly every year. This trend is primarily associated with mobility and convenience of sachets, which are the main companions of the modern buyer. The appearance and distribution of these packages is dictated by the current concept of the everyday rhythm of life, when everything you need is at hand, does not burden large volumes and provides flexibility of use.

30.03.2020
Choosing Conveyor For Filling Line
Pharma

The conveyor is an integral part of any filling line and acts as a connecting link between different technological sections. By means of a conveyor, containers move from one unit to another, which ensures timely washing, dosing, capping, labeling and other operations. The difficulty in choosing the optimal conveyor lies in the fact that the installation must meet all the necessary technical requirements in a particular production line and fulfill the task effectively, stably and safely.

30.03.2020
Various bottling lines
Pharma

Filling lines are technological systems for sequential execution of various packaging processes. Linear packaging systems are built based on modular architecture. Depending on the individual filling technology, the layout of the lines is carried out by washing, dosing, capping, labeling and other equipment. The connecting element between the sections is the conveyor along which the container moves.

09.03.2020
Inspection machines - an effective way to control the quality of finished products
Pharma

The quality of packaging technical processes is one of the key criteria for product competitiveness. Correspondence of the actual volume to the declared one, hermetic capping and an even label have a significant impact on the overall impression of the consumer about the product. That is why responsible manufacturers carefully choose equipment, choosing in favor of reliable installations of reputable brands.

06.03.2020
Differences of plate and belt conveyors
Pharma

In any highly automated equipment, whether it is a linear automatic machine, a monoblock or a packaging line, there is always a conveyor system. The conveyor is a connecting element in the complex and provides timely supply of containers from one functional section to another. According to the constructive device and the principle of operation, conveyors are divided into several types, the most common of which are slat conveyors and belt-type conveyors.

05.03.2020
Labeling systems and automatic labeling lines
Pharma

Introduction of the goods to the consumer begins with study of the label. Information about the composition, place of production, release date and other data about the product is placed on the label that adorns the package. Many people fear buying a product without a label: it is too likely to become the owner of a low-quality fake. Responsible manufacturers ensure that product data is fully accessible to customers and help them make informed choices.

05.03.2020
Zhejiang Dingye Machinery Co, Ltd
Pharma

Zhejiang Dingye Machinery Co.,Ltd. has specialized in the production of "Dingye" brand packaging machines and related equipment since 1991. 

08.11.2017