The machine is produced by absorption of foreign advanced technology. Its filling end is controlled separately, no discharging without filling; being sealing-guided, the machine will automatically stop if the sealing quality isn’t good; the way of the oriented inflation in the charging end is accurate and efficient with minimal gas consumption. Production Capacity 2400-3600 cans/hr
This machine is made from the former semi-automatic aerosol filling machine. It assembles the liquid filling, inflate and seal on the same table, it needs only one worker to operate it. It has high speed, high-accuracy and good stabilization. Good choice for the medium-sized and small-scale company.
QGB2Y bag-on-valve gas filling&sealing machineis suitable for green products packaging (water-based). It functions compressed air filling and sealing and then does line pack of the raw materials. It is fast in speed, precise in filling volume and good in airtight seal, and the required inflation pressure can be adjusted at will.
The machine consists of three units: Rotating empty container feeder, Rotating liquid filling and crimping star system, Rotating gas filling star system. To operate the machine needs compressed air with pressure 8 kg / cm3. Max. output is 60 containers per minute.
The machine consists of two units: Rotating empty container feeder and Rotating aerosol filling with crimping and gassing unit. To operate the machine needs compressed air with pressure 8 bars. Capacity is 1,000 – 2,000 containers per hour.
The unit designed to fill containers with aerosols and is operated on a table by the operator either automatically or manually. For filling process, the operator puts the containers under the filling nozzles and the filling is started by pressing on the foot pedal. To operate the unit needs compressed air with pressure 4 – 6 kg / cm3.
The unit is designed to gas and crimp containers with aerosols and is operated on a table by the operator manually. The containers with valves on them are put under the crimping unit, and by pressing on the foot pedal the process of crimping and gas filling would be completed at the same time.